This is a condensed video that has all of the action clips 1 through 9, edited and produced into a "Short Film". It is the first test of Camry6's HONDA ATC 750 MSX in Newfoundland Canada. We all agreed to keep the throttle limited to around 1/4 throttle for safety. All of these runs were done using 1st and 2nd gear. This machine is built primarily from a 1975 HONDA CB 750K motorcycle. I used parts from a 1982 HONDA ATC 200, and a 1985 HONDA ATC 200M. It took me 6 weeks, 7 hours per day, 5 days per week to build. I did this during a short lay-off period from work. March 2010 to May 2010. I needed something to keep me busy! I thought of this project about 2 years earlier, but never had the time to invest. It has a 67 HP, inline 4 cylinder SOHC, 4 carburetor engine. It has a 5 speed transmission. It has a potential top speed of 100 MPH (160 KPH). It does not have reverse. It does have a kick-starter. It is chain driven. It has a twist throttle. It has a manual clutch. It has 7 " of suspension travel in the rear on 16" Forsa coil-over shocks. It has the standard ATC 200M 1.5" of suspension travel in the front, with auxilliary coil-over shocks to support the extra weight. The machine weighs 600 LBs and has a weight to power ratio of 9 LBs per HP. It has 25x13-9 Cheng Shin C828 LumberJack tires on the rear and a Cheng Shin 25x12-9 C866 tire on the front. This machine is registered with the MRD as a home built ATV-It is a totally legal off-road vehicle. It is also legal to carry ...
http://www.youtube.com/watch?v=76atgXT4Tdw&hl=en
สมัครสมาชิก:
ส่งความคิดเห็น (Atom)
ไม่มีความคิดเห็น:
แสดงความคิดเห็น